The detection distance (center position) is 30mm
Small size, small spot
High detection accuracy, ultra-high cost performance
At the same time with switching quantity and analog quantity dual output
Multiple detection modes can be used in more applications
The top design has a large output indicator light, more intuitive
Clear and bright white digital tube display, more high-end
Film key, simple and convenient operation setting
Aluminum alloy shell, durable
2 wire system power supply>16V
Input: RTD, TC, Ohm, potentiometer, current and voltage signals
Current and voltage output (current output 0...23mA, voltage output 0...10 VDC)
Ac and DC general power supply
Excellent EMC electromagnetic compatibility and noise suppression function
Red laser light source, accurate measurement
The appearance size is very small, the spot is very small. The diffuse reflection type is only 1mm (at 300mm)
The minimum diameter of the wire can reach 0.01mm
The response time is very small, less than 0.5ms
With sensitivity adjustment knob, you can set the measurement distance
With light on/dark on setting knob
With action signal output indicator and laser status indicator
PNP and NPN output signals are optional
Cable and connector types are optional
Long life and fast response
The sensitivity is optimized to prevent the magnetic field interference around the cylinder from misoperation
Shock resistance, shock resistance
Protection grade optimization, waterproof, oil - proof characteristics
Shell material optimization, high strength, fixed firmly
Integrated injection molding, structure enhancement, appearance optimization
Type screw M3
1m free cut
Coaxial configuration
Straight shape
Bending radius R10
Optical axis minimum detection object Φ1.0mm
Commonly used standard size encoder, outer diameter is 58mm
Incremental solid shaft encoder
The number of output pulses can be up to 1500 in general and 10000 in general
Signal output mode can be push-pull output and RS422 output
Adopt metal code plate, can bear higher strength load
Short circuit protection
Smooth cylindrical appearance with diameter of Φ04
Stainless steel case
Induction distance is 0.8mm, flush/non-flush installation
With 360° visible signal output indicator light
Short circuit protection function, power supply is connected to reverse protection
The signal output is DC without polarity
Flexible configuration, cable or connector output
Through up to 1 million life testing tests
All components and circuits are tested in harsh and complex electromagnetic environments
Uncooled array detector (25μm)
Medium resolution 382×288 pixels
Temperature measurement up to 1500℃
The rated load is 3T
Sensitivity 1.8mV/V
The accuracy grade is 0.03
Zero balance 0.44%F.S
Rated excitation voltage 10...12VDC
Maximum excitation voltage 15VDC
Input impedance 400±20Ω
Output impedance 352±3Ω
Insulation resistance≥5000mΩ
Single pair of grating multi-faceted protection
Optical axis spacing can be selected 10mm, 20mm, 40mm
Long distance, single side of the furthest up to 30m or more
Dual circuit self-checking output design, high security
Line synchronization technology, anti-electromagnetic interference and light interference ability
Vibration-resistant structure and aluminum alloy casing, good resistance to vibration
A variety of mounting brackets are available for a wide range of mounting environments
Monochromatic detection mode
The control module is separated from the detection lens
Temperature range 250...3000 ℃
Optional water cooling/purge jacket
Analog output mode is optional
Visual and laser targeting functions are standard
An upgrade to the 300F
TEST enables remote self-test
Ac/DC power supply optional
Field lens angle 1°, 7° circular angle optional or 1° x 25° rectangular angle
Digital tube temperature setting, multi-color single row LED infrared signal output indication
A variety of digital output, 1ms response time, output delay 1...250 ms can be set
Optical fiber length can be customized based on site conditions (3m, 6 m, 10 m, etc.)
Instrument action threshold is adjustable,
Suitable for high temperature, dust, steam and other harsh environment
Can be air purged, air cooled or water cooled
The split design is composed of three parts: field detection lens, armored optical cable and digital signal processor
Universal small square shape design
Counter-reflective, specular reflective, diffuse reflective, background suppression optional
Point light source and strip light source, strip light type products suitable for hollow or concave-convex surfaces of the product detection
Economical and applicable to general industries
Sensitivity can be adjusted
Strong anti-jamming ability
General-purpose type, press-specific type, sunlight-resistant type, anti-strong light interference type optional
Optical axis spacing can be selected 10mm, 20mm, 40mm
Long distance to the shooting distance, the farthest can be up to 30m
Dual-circuit self-checking output design, high security
Line synchronization technology, anti-electromagnetic interference and ultra-strong resistance to light interference
Vibration-resistant structure and aluminum alloy shell, good resistance to vibration
Punching machine type adopts the controller to detect the signals, the working voltage for AC110. 220V, AC380V
A variety of mounting brackets are available, suitable for a variety of installation environments.
The detection distance (center position) is 50mm
Small size, small spot
High detection accuracy, ultra-high cost performance
At the same time with switching quantity and analog quantity dual output
Multiple detection modes can be used in more applications
The top design has a large output indicator light, more intuitive
Clear and bright white digital tube display, more high-end
Film key, simple and convenient operation setting
Aluminum alloy shell, durable
Type screw M3
1m free cut
Coaxial configuration
Straight shape
Bending radius R25
Optical axis minimum detection object Φ1.0mm
Suitable for cylinder T groove 4.35×4.55 specification
Available with AirTAC-t grooved cylinders
High positioning accuracy, strong anti-interference ability
NPN type without contact
Direct replacement of reed tube magnetic switch
Cable and connector types are optional
Long life and fast response
The sensitivity is optimized to prevent the magnetic field interference around the cylinder from misoperation
Shock resistance, shock resistance
Protection grade optimization, waterproof, oil - proof characteristics
Shell material optimization, high strength, fixed firmly
Integrated injection molding, structure enhancement, appearance optimization
Compact and economical encoder, only 38mm diameter
Incremental hollow shaft encoder
The output pulse number can reach 2500
Signal output mode can be push-pull output and RS422 output
Adopt metal code plate, can bear higher strength load
Short circuit protection
Smooth cylindrical appearance with diameter of Φ04
DC3 wire, stainless steel case
Induction distance is 0.6mm, flush/non-flush installation
With 360° visible signal output indicator light
Short circuit protection function, power supply is connected to reverse protection
The signal output is PNP or NPN
Flexible configuration, cable output
Through up to 1 million life testing tests
All components and circuits are tested in harsh and complex electromagnetic environments
Uncooled array detector (17μm)
High resolution 640×480 pixels VGA
Temperature measurement up to 1500℃
The rated load is 5T
Sensitivity 3.0002mV/V
The accuracy grade is 0.03
Zero balance 0.32% F.S
Rated excitation voltage 10...12VDC
Maximum excitation voltage 15VDC
Input impedance 400±20Ω
Output impedance 352±3Ω
Insulation resistance≥5000mΩ
Compact structure, hawsman plug out, suitable for small space occasions
Can be mounted top or side
Fork body can be standard and short and small
Not affected by flow, turbulence, bubble, foam, vibration and other product characteristics
Full electronic circuit design, no maintenance after operation
The process pressure can reach 2MPa
The process temperature can reach 150℃
Using the latest microprocessor technology, robust structural design
Electronic scanning is used instead of rotating prism
Accurate and reliable position detection for hot metals reaching and exceeding 300℃
Adopting signal comparison technology to remove background infrared noise interference
The measurement is not affected by local heat sources in the field of view
Measurement is not affected by lens dust and field moisture
Rod LED light emitting tube is used to display the position of the measured object
The response time is 1ms and in 1...250ms range digital adjustable
Instrument power-on self-test or remote control self-test
Relay output, photoelectric isolation output, transistor output PNP/NPN both
Ac AC80... 240V and DC24V power supply ports are optional
Designed for vehicle separation detection
Optical axis spacing can be selected 20mm, 40mm
The focussing distance can be up to 20m
With self-test function, can monitor the foreign object blocking the beam and automatically shield the abnormal beam
Cover built-in electric heating glass, temperature controller, humidity controller, automatic temperature regulation
The use of high-energy, high-penetration imported photoelectric tubes, stable and reliable performance
Unique program algorithms, can be set to cover the object to achieve the required size before the Output signal
can communicate with the host computer.
The detection distance (center position) is 100mm
Small size, small spot
High detection accuracy, ultra-high cost performance
At the same time with switching quantity and analog quantity dual output
Multiple detection modes can be used in more applications
The top design has a large output indicator light, more intuitive
Clear and bright white digital tube display, more high-end
Film key, simple and convenient operation setting
Aluminum alloy shell, durable
DE
CN
FR
JP