The rated load is 20t
Sensitivity 1.0±0.1mV/V
The accuracy grade is 0.5
Rated excitation voltage 9...30VDC
Rated output current 4...20mA
Input impedance 750±50Ω
Output impedance 702±3Ω
Insulation resistance≥5000mΩ
Blind Zone Safety Light Curtain
Optical axis spacing can be selected from 10mm, 20mm
Adopting self-checking and cross-checking design, higher safety
Line synchronization technology, which can effectively avoid the interference of external infrared light
Individual redundant dual-circuit outputs
Monitoring, reset function optional
2 wire system, power supply and signal sharing
Input Pt100 (2 wire, 3 wire or 4 wire)
Output 4...20mA
High measuring accuracy, less than 0.1% set range
Ultra-thin shell design, thickness of only 6mm
Set parameters by DIP switch
Excellent EMC electromagnetic compatibility and noise suppression
Detection distance (center position) is 100mm, detection range is 100mm
Super small size
Resolution up to 20μm
Linearity plus or minus 0.1% F.S.
Analog output / 485 Communication Optional
4 digit display
High cost performance
Comparable to the performance of high-end products
High temperature resistant,the process temperature-180℃...+500℃
Components are not easy to block, break, damage, no regular maintenance
Non-adhesive material,three-terminal shielding technology is adopted
Universal power,24VDC or 220VAC available
Indicator complete, red light alarm, green light normal, yellow light system failure
Convenient electrical connection, double electrical interface, wiring process is more safe and convenient
Drive ability is strong, 500 Ω between center end and shield end, 150 Ω between shield end and ground
Surge suppression, built-in 1000V spark protection, surge suppression
Simple wiring, easy to install
Various temperature measuring elements are available
An optional core
Optional integrated temperature transmitter
High precision, good stability and fast response
Monochrome detection mode
It is generally used for testing plates, profiles and bars
With field temperature window
It can adapt to harsh working conditions on site
High detection accuracy,fast response time
Multiple temperature range options
Optional air / water cooling protective sleeve
Various analog output modes are available
Standard visual and laser aiming functions
Small size red laser ranging
Easy to target with visible beam
Light on, dark on can be set
Operating voltage range from 18V to 30V
With switching output and analog output
Alarm distance range can be set
It can detect the accurate position of the vehicle and the object in the production line
Micro-compact form factor
Diffuse reflection type, detection distance 85mm
Response speed less than 1ms
Economical, suitable for electronics, printing and other industries
Cable connection
High anti-interference capability
The TOF scheme can realize the detection and protection of 270-degree field of view Angle and the maximum range of 25m
Laser protection level 1, human eye safety
Large field of view, long distance, high speed accurate measurement
Precise temperature control design, working temperature range -25℃...+ 50 ℃
Reliable closed design, protection class IP65
Suitable for cylinder T groove 4.35×4.55 specification
Available with AirTAC-t grooved cylinders
High positioning accuracy, strong anti-interference ability
Two wire type no contact type
Direct replacement of reed tube magnetic switch
Cable and connector types are optional
Long life and fast response
The sensitivity is optimized to prevent the magnetic field interference around the cylinder from misoperation
Shock resistance, shock resistance
Protection grade optimization, waterproof, oil - proof characteristics
Shell material optimization, high strength, fixed firmly
Integrated injection molding, structure enhancement, appearance optimization
Type screw M3
1m free cut
Coaxial configuration
Straight shape
Bending radius R2
Optical axis minimum detection object Φ1.0mm
Small shape economic encoder, outer diameter of 50mm
Incremental solid shaft encoder
The output pulse number can reach 6000
Signal output mode can be push-pull output and RS422 output
Adopt metal code plate, can bear higher strength load
Short circuit protection
Small size, light weight, high precision
Smooth cylindrical appearance with diameter of Φ04
Stainless steel case
Induction range 0.6...2.5mm, flush/non-flush mounting
With 360° visible signal output indicator light
Short circuit protection function, power supply is connected to reverse protection
The signal output is PNP or NPN
Flexible configuration, cable or connector or wire connector output
Through up to 1 million life testing tests
All components and circuits are tested in harsh and complex electromagnetic environments
Uncooled array detector (25μm)
Low resolution 160×120 pixels
Temperature measurement up to 1500℃
With visible light camera
The rated load is 25t
Sensitivity 1.0±0.1mV/V
The accuracy grade is 0.5
Rated excitation voltage 9...30VDC
Rated output current 4...20mA
Input impedance 750±50Ω
Output impedance 702±3Ω
Insulation resistance≥5000mΩ
2-wire power supply > 15V
Input: RTD, TC, potentiometer, current, voltage
Current and voltage output (current output 0...23mA, voltage output 0...10 VDC)
High measuring accuracy, less than 0.1% set range
6mm ultra-thin shell design
Excellent EMC electromagnetic compatibility and noise suppression
Detection distance (center position) is 150mm, detection range is 200mm
Super small size
Resolution up to 60μm
Linearity plus or minus 0.5% F.S.
Analog output / 485 Communication Optional
4 digit display
High cost performance
Comparable to the performance of high-end products
Suitable for large scale measurement: power plant / cement factory, cement bunker
Suitable for powder or solid particles and other measurement media
Installation mode: Cable type RF admittance level switch is recommended to be installed vertically
Components are not easy to block, break, damage, no regular maintenance
Non-adhesive material,three-terminal shielding technology is adopted
Universal power,24VDC or 220VAC available
Indicator complete, red light alarm, green light normal, yellow light system failure
Drive ability is strong, 500 Ω between center end and shield end, 150 Ω between shield end and ground
Surge suppression, built-in 1000V spark protection, surge suppression
Designed according to IEC61496 level 4 standard
Optical axis spacing can be selected from 10mm, 20mm, 40mm
MCU redundancy design, with self-checking and cross-checking functions, higher security
Wide voltage power supply, operating voltage 24VDC±20%
Line synchronization technology, strong resistance to electromagnetic interference
Individual redundant dual circuit outputs, to prevent the failure of individual circuits to prevent hidden dangers
Independent internal dual power supply
Two color detection mode, higher accuracy and more accurate temperature measurement
Easier to penetrate dust, smoke and water vapor
It is more suitable for the detection of rods and wires, and has low requirements for aiming
With field temperature window
Various temperature ranges can be selected
Optional air / water cooling protective sleeve
Various analog output modes are available
Standard visual and laser aiming functions
Small-size infrared ranging
Easy to target with visible beam
Light on, dark on can be set
Operating voltage range from 18V to 30V
With switching output and analog output
Alarm distance range can be set
It can detect the accurate position of the vehicle and the object in the production line
High sensitivity adjustable, minimum target temperature 270℃
TEST Enables remote self-test
Digital tube temperature setting, instrument action gate value is adjustable, multi-color LED array infrared signal output indication
Ac/DC power supply Optional
1°×25° Detection Angle
A variety of digital output, 1ms response time, output delay 1...250ms can be set
Optional aviation and heavy duty connectors
Laser aiming to assist the adjustment of installation orientation
Suitable for dusty, steam environment
Sturdy IP65 aluminum case with water cooling
Laser protection level 1, eye safety
Wide field of view: Scanning Angle is 270°
Long distance: 0...120m and 80m at 10% reflectance
High precision: Accuracy up to 3cm
High speed: scanning frequency up to 100Hz
Intelligent echo processing technology, can adapt to rain, fog, snow and other harsh environment
Built-in automatic temperature control design, even in the outdoor low temperature -40℃ can be normal operation
Seal protection class IP67
2 channel switch output, can be directly connected to anti-collision system
Measuring range up to 25m
Use of red Class 1 laser beam is safe for human eyes
Supply voltage 18V 30V
Push-pull switch output and analog output can be configured
Various measurement modes can be set according to requirements
With transient protection, polarity reversal protection and output short circuit protection functions
DE
CN
FR
JP