A modulated red visible laser beam is used for measurement
Long measuring distance, more than 20m, integrated design with reflector
Both cold and hot products can be tested
Objects with a size of 6mm can be detected with a reflecting prism
The edge resolution is 3mm/m
Infrared filter function can be used for heating furnace mouth
3R Visible laser beam
The cast aluminum housing is of solid construction and IP65 protection rating
With water cooling air cooling function
Measuring Angle range is wide
Multiple switching output (relay output /PNP/NPN)
- 10... 40℃ without cooling; - 10... 60℃ using air cooling; - 20... 70℃ using water cooling
The average trouble-free time is 32,000 hours
Suitable for dusty, steam and other harsh environment
High sensitivity adjustable, minimum target temperature 270℃
TEST Enables remote self-test
Digital tube temperature setting, instrument action gate value is adjustable, multi-color LED array infrared signal output indication
Ac/DC power supply Optional
1°×25° Detection Angle
A variety of digital output, 1ms response time, output delay 1...250ms can be set
Optional aviation and heavy duty connectors
Laser aiming to assist the adjustment of installation orientation
Suitable for dusty, steam environment
Sturdy IP65 aluminum case with water cooling
An upgrade to the 300F
TEST enables remote self-test
Ac/DC power supply optional
Field lens angle 1°, 7° circular angle optional or 1° x 25° rectangular angle
Digital tube temperature setting, multi-color single row LED infrared signal output indication
A variety of digital output, 1ms response time, output delay 1...250 ms can be set
Optical fiber length can be customized based on site conditions (3m, 6 m, 10 m, etc.)
Instrument action threshold is adjustable,
Suitable for high temperature, dust, steam and other harsh environment
Can be air purged, air cooled or water cooled
The split design is composed of three parts: field detection lens, armored optical cable and digital signal processor
Using the latest microprocessor technology, robust structural design
Electronic scanning is used instead of rotating prism
Accurate and reliable position detection for hot metals reaching and exceeding 300℃
Adopting signal comparison technology to remove background infrared noise interference
The measurement is not affected by local heat sources in the field of view
Measurement is not affected by lens dust and field moisture
Rod LED light emitting tube is used to display the position of the measured object
The response time is 1ms and in 1...250ms range digital adjustable
Instrument power-on self-test or remote control self-test
Relay output, photoelectric isolation output, transistor output PNP/NPN both
Ac AC80... 240V and DC24V power supply ports are optional
Can measure the sleeve size and shape of rod and wire
Analog output product location
Switching output whether there is a signal product
Dc DC24V power supply port is optional
Adapt to dusty, steam and other harsh environment
Using the latest microprocessor technology, robust structural design
Electronic scanning is used instead of rotating prism
The measurement is not affected by local heat sources in the field of view
The response time is 2ms and in 1...250ms range digital adjustable
Instrument power-on self-test or manual self-test
Relay output, photoelectric isolation output, transistor output PNP/NPN both
IP66 aluminum case, water or air cooling
Designed for iron and steel, metallurgy, non-ferrous metals and other heavy industry development and use, collision resistance, impact resistance
Detection distance 0...3000mm, no blind spots
A variety of detection height is optional, up to 1200mm
Anti - electromagnetic, anti - interference ability
Optional water cooling jacket
A variety of switching output
Adapt to dusty, steam and other harsh environment
IP66 aluminum shell
DE
CN
FR
JP