Paraboloid antenna
It is mainly used to measure dust and other solids
Measurement range 0...70m
Thread and flange connection styles are optional
It is suitable for solid, storage container, process container or occasions where strong dust is easy to crystallize and condense
Non contact radar, no wear and pollution
The antenna is small in size and easy to install
The measurement blind area is small, and good results will be achieved for small tank measurement
Small beam angle and concentrated energy not only enhance the echo ability, but also help to avoid interferences
It is almost unaffected by the changes of water vapor, temperature and pressure in the atmosphere
High signal-to-noise ratio,Better performance can be obtained even in case of fluctuation
Horn antenna
It is mainly used to measure dust and other solids
Measurement range 0...30m
Thread and flange connection styles are optional
Non contact radar, no wear and pollution
The antenna is small in size and easy to install
The measurement blind area is small, and good results will be achieved for small tank measurement
Small beam angle and concentrated energy not only enhance the echo ability, but also help to avoid interferences
It is almost unaffected by the changes of water vapor, temperature and pressure in the atmosphere
High signal-to-noise ratio,Better performance can be obtained even in case of fluctuation
Totally enclosed horn antenna
Measurement range 0...20m (15m for solid particles)
It has good stability and can continuously and stably obtain accurate data
Flange or support connection
Non contact radar, no wear and pollution
Small and light, easy to install
The measurement blind area is smaller, and good results will be achieved for small tank measurement
Small beam angle and concentrated energy not only enhance the echo ability, but also help to avoid interferences
It has strong anti-interference and is almost unaffected by the changes of water vapor, temperature and pressure in the atmosphere
High signal-to-noise ratio,Better performance can be obtained even in case of fluctuation
Measurement range 0...120m
It is mainly used to measure non corrosive liquids
Small beam angles of 3 °and 8 °can better penetrate the space of mixing blade and tank wall
Within the range of 10m, the minimum blind area can reach 5cm, and the small tank can also realize accurate measurement
The accuracy can reach ± 1mm
Thread and flange connection styles are optional
Spherical antenna, small size, easy to install
Anti condensation design, unique antenna structure and special anti condensation algorithm
It is hardly affected by the changes of water vapor, temperature and pressure in the atmosphere
High signal-to-noise ratio, better performance can be obtained even in case of fluctuation
Measurement range 0...120m
It is mainly used to measure corrosive liquids
Small beam angles of 3 °and 8 °can better penetrate the space of mixing blade and tank wall
Within the range of 10m, the minimum blind area can reach 5cm, and the small tank can also realize accurate measurement
The accuracy can reach ± 1mm
Thread and flange connection styles are optional
Optional flange and lens integrated all PTFE material, with stronger anti-corrosion
Anti condensation design, unique antenna structure and special anti condensation algorithm
It is hardly affected by the changes of water vapor, temperature and pressure in the atmosphere
High signal-to-noise ratio, better performance can be obtained even in case of fluctuation
Measurement range 0...120m
It is mainly used to measure the material level of bulk, particle, dust and other silos
With only 3 ° beam angle, small diameter silos can also be easily measured
The blind area is only 8cm, which can be measured in large and small range silos
The accuracy can reach ± 1mm
The measurement band is small and has better penetrability to strong dust environment
Universal flange connection, the measuring angle can be adjusted in any direction
Spherical antenna, small size, easy to install
The special measurement algorithm can penetrate the attached material powder on the antenna surface
High signal-to-noise ratio, better performance can be obtained even in case of fluctuation
Measurement range 0...120m
It is mainly used to measure the material level of dust, very low dielectric constant and other silos
With only 3 ° beam angle, small diameter silos can also be easily measured
The blind area is only 8cm, which can be measured in large and small range silos
The accuracy can reach ± 1mm
The measurement band is small and has better penetrability to strong dust environment
Universal flange connection, the measuring angle can be adjusted in any direction
Planar antenna, small size, easy to install
The special measurement algorithm can penetrate the attached material powder on the antenna surface
High signal-to-noise ratio, better performance can be obtained even in case of fluctuation
Measurement range 0...120m
Suitable for high temperature and high pressure measuring medium
Specially developed heat insulation device, 350 ℃ and 1200 ℃ optional
Solid quartz insulation flange, with pressure resistance up to 10MPa
With only 3 ° beam angle, small diameter silos can also be easily measured
The blind area is only 8cm, which has no effect on the measuring range
The accuracy can reach ± 1mm
The measuring band is small, which can easily penetrate the thermal insulation device and directly reach the measured object
Spherical antenna, small size, easy to install
High signal-to-noise ratio, better performance can be obtained even in case of fluctuation
Measurement range 0...30m
It is mainly used to measure the water level of rivers, reservoirs, lakes, open channels, etc
80g continuous frequency modulation wave and 6 ° beam angle are adopted to realize stable measurement in complex environment
Can use built-in battery, low power design, stable operation for 3-5 years
The special measurement algorithm is suitable for the measurement of water level of weeds, waves and turbulence
The accuracy can reach ± 1mm
RS485 / Nb communication mode is optional
Bracket connection, convenient installation
Optional power supply mode
Display function optional
3D radar level scanner using FMCW 140GHz
Realize material multi-point scanning and 3D imaging
Measuring range 0...70m
It is mainly used to measure bulk, particles, dust and other silos
Display material level, volume and weight to form a three-dimensional image
Real-time inventory, at any time to grasp the inventory situation
Scanning Angle up to 90°, realize scanning without blind area coverage
Large diameter silo can be configured with multiple sets to achieve accurate measurement
The accuracy of single point material level can reach ±2mm, and the maximum volume accuracy is less than 2%
The measuring band is small, and it has better penetration to strong dust, water vapor and foam
When measuring liquid, the maximum volume range is up to 5m
One-piece design, simple and light
Non-contact measurement, easy installation, economical application
Accuracy ±0.25%, resolution 1mm
Process pressure up to 1bar
The process temperature can reach 70℃
Affected by noise, steam, dust, vacuum, etc
Subject to changes in temperature and pressure
The maximum amount of liquid measurement range is up to 10m
One-piece design, simple and light
Non-contact measurement, easy installation, economical application
Accuracy ±0.25%, resolution 1mm
Process pressure up to 1bar
The process temperature can reach 70℃
Affected by noise, steam, dust, vacuum, etc
Subject to changes in temperature and pressure
When measuring liquid, the maximum volume range is up to 15m
One-piece design, simple and light
Non-contact measurement, easy installation, economical application
Accuracy ±0.25%, resolution 1mm
Process pressure up to 1bar
The process temperature can reach 70℃
Affected by noise, steam, dust, vacuum, etc
Subject to changes in temperature and pressure
When measuring liquid, the maximum volume range is up to 20m
One-piece design, simple and light
Non-contact measurement, easy installation, economical application
Accuracy ±0.25%, resolution 1mm
Process pressure up to 1bar
The process temperature can reach 70℃
Affected by noise, steam, dust, vacuum, etc
Subject to changes in temperature and pressure
Split design, easy to view parameters nearby
Non-contact measurement, convenient installation, economical and applicable
Accuracy 0.25%...0.5%, resolution 1mm
Measuring range 0...20m
Process temperature can reach 80 ℃
Affected by noise, steam, dust, vacuum, etc
Affected by changes in temperature and pressure
Split design, easy to view parameters nearby
Non-contact measurement, convenient installation, economical and applicable
Accuracy 0.25%...0.5%, resolution 1mm
Measuring range 0...20m
Process temperature can reach 80 ℃
Affected by noise, steam, dust, vacuum, etc
Affected by changes in temperature and pressure
Split design, easy to view parameters nearby
Non-contact measurement, convenient installation, economical and applicable
Accuracy 0.25%...0.5%, resolution 1mm
Measuring range 0...20m
Process temperature can reach 80 ℃
Affected by noise, steam, dust, vacuum, etc
Affected by changes in temperature and pressure
Measurement range 0...15m
Modular design, sensors and electronic units can be exchanged to facilitate spare parts and maintenance
Accuracy ± 1mm or ± 0.05% F.S
The process pressure can reach 10MPa
The process temperature can reach 350 ℃
Support two-wire system 4...20mA HART Communication
With field key calibration, easy and fast to use
There is no need for regular correction and maintenance
The anti-corrosion process of guide rod and floating ball is suitable for the measurement of acid-base strongly corrosive liquid
Imported plastic sealed reed pipe with long service life
Highlight the led to display the meter, which can be configured into horizontal and vertical structure design
Convenient for viewing in various applications
Flameproof and intrinsically safe explosion proof certification optional
Unique sealing design, the protection grade of the whole machine can reach IP66 / IP67
Standard aluminum housing, simple wiring, widely used
Pontoon material 304, 316L, PTFE, FEP, PP and other options
The display panel is widened, the scale is thickened, and the long-distance display is clear
Accuracy ± 5mm
The process pressure can reach 10MPa
The process temperature can reach 350 ℃
Support two-wire system 4...20mA HART communication
The joint between the buoy with lining and the flange adopts a unique lining process, which is effective
Prevent accidental corrosion damage caused by medium leakage caused by extrusion damage
PP products are light in anti-corrosion and weigh only 1 / 5 of stainless steel, convenient installation
High stability motor and microswitch
Double bearing design, smooth operation, long service life
Adopt integrated anti-loose structure design, easy to replace and maintain
Available in 304/316L stainless steel
The protection level reaches IP65
Optional explosion-proof, wide range of use
Measurement range 0...350m
Using diffused silicon piezoelectric crystal, the measurement accuracy can reach 0.1% F.S
The part of the probe in contact with the liquid shall be fully potted to prevent condensation
Thread and flange connection are optional
Probe material 304316l optional
Stable use, simple maintenance, no debugging
Cable length optional
Built in temperature error compensation
The cable sealing adopts the cone plugging sealing process, which can be used for outdoor and other complex working conditions
Equipped with anti surge impact circuit,good stability
Measurement range 0...200m
Using diffused silicon piezoelectric crystal, the measurement accuracy can reach 0.1% F.S
The part of the probe in contact with the liquid shall be fully potted to prevent condensation
Thread and flange connection are optional
Probe material 316L, PP, PVDF optional
Stable use, simple maintenance, no debugging
Cable length optional
Built in temperature error compensation
The cable sealing adopts the cone plugging sealing process, which can be used for outdoor and other complex working conditions
Equipped with anti surge impact circuit,good stability
The detection range is up to 6 meters
Fast response algorithm, suitable material level changes very quickly
The blind zone is only 350mm
It is convenient to set parameters and debug by pressing buttons
Output analog and switching signals
Built-in temperature compensation
Good stability, fast response speed
Detection range 90...2000mm
Built-in IO-Link communication interface, can be used for parameter setting and debugging
Dead zone 0...90mm
Sound cone width is optional, switch mode is optional
Output analog and switching signals
Built-in synchronization, temperature compensation function
Good stability, fast response speed
DE
CN
FR
JP